28
Start Delay
(depending on model)
The “Start Delay” is an option
which delays the start of the
programme at the consumer’s
convenience and enables the
use of off-peak electricity (for
example late at night).
Select programme,
temperature and options.
•
Press the “Start Delay”
button to select the delay
time of 1 to 19 hours;
•
Press the “
Start/Pause
”
button. The indicator light
of the “
Start/Pause
”
button lights up and the
lamp of the “Start Delay”
button flashes.
•
The time delay indication
disappears when the
programme starts and is
replaced by the remaining
time.
•
The number of hours
preselected can be reduced
later by pressing the “Start
Delay” button again.
To cancel the “Start
Delay”.
•
Turn the programme
selector to the “
”
position.
•
Reselect the desired
programme and options and
press the
“Start/Pause
”
button.
Programme start
Turn on the tap and press the
“Start/Pause”
button. The
indicator light of the
“Start/
Pause”
button lights up.
After starting the programme,
the sequence indication
signals the Wash, Rinse and
Spin phases.
Note:
If there is a power
interruption or if the appliance
is disconnected during the
cycle, the programme will start
again at the point where it was
interrupted.
Lid lock
For reasons of safety, the lid is
locked during certain phases of
the cycle.
At the end of the cycle or
during an interruption, the lid
unlocks automatically after
about 1 minute.
Programme end
•
The remaining time
indicator shows “0:00” and
all the lights of the
programme sequence
indication are off.
1.
Turn the programme
selector to the “
”
position.
2.
Turn off the tap.
3.
Open the lid and drum flaps
and unload the machine.
Change the programme or
options during the cycle
1.
Select the new programme
with the programme
selector. If necessary, select
the additional options and
the spin speed. The indicator
lamp of the “
Start/Pause
”
button flashes.
Note:
the “Start Delay” and
“Prewash” options cannot be
selected after a change of
programme.
2.
Press the “
Start/Pause
”
button. The newly selected
programme will start at the
washing position where the
previous programme was
interrupted.
Note
: Do not add detergent
for the new programme.
Programme interruption/
pause
If, for any reason, you want to
interrupt the programme for a
certain time and continue it
later:
1.
Press the “
Start/Pause
”
button. The pilot lamp
flashes.
2.
After the desired pause,
press the “
Start/Pause
”
button again.
Cancel programme
If the current programme has
to be terminated prematurely
and cancelled, proceed as
follows:
1.
Put the programme selector
on “Drain”.
2.
Press the “
Start/Pause
”
button to start the “Drain”
programme.
