31
Water inlet hose filter
Check and clean regularly
(at least two or three times
a year).
1.
Unplug the appliance.
2.
Turn off the tap.
3.
Unscrew the hose from the
tap.
4.
Carefully clean the filter
located at the end of hose,
without disassembling it, for
example with a tooth-brush.
Note
: For machines
equipped with hose type
“
A
”, it must not be
submerged in water.
5.
Screw the flexible hose back
onto the tap by hand. Do
not use pliers (risk of
squashing the joint).
6. Turn on the tap and check
that the connections are
water-tight.
7.
Plug the appliance back in.
Recovering an object that
falls between the drum
and the tub
If an object accidentally falls
between the drum and the
tub, you can recover it thanks
to one of the removable drum
blades:
1.
Unplug the appliance.
2.
Remove the laundry from
the drum.
3.
Close the drum flaps and
turn the drum a half-turn.
4.
Using a spanner, press on
the plastic end while sliding
the blade from left to right.
5.
It will fall into the drum.
6.
Open the drum: you can
recover the object through
the hole in the drum.
7.
Refit the blade from inside
the drum:
Position the plastic tip above
the hole on the right side of
the drum.
8.
Then slide the plastic blade
from right to left until it
clips.
9.
Close the drum flaps again,
turn the drum through half
a turn and check the
positioning of the blade at
all its anchorage points.
10.
Plug the appliance in again.
A
7
3
4
