EN-18
PLUG REPLACEMENT (ONLY FOR REWIRABLE
PLUG OF UK & IRELAND)
If you need to replace the fitted plug then follow the instructions below.
IMPORTANT
The wires in the mains lead are colored in accordance with the following code:
BLUE =NEUTRAL
Brown = Live
As the colors of the wires in the mains lead of this appliance may not correspond with the colored
markings identifying the terminals in your plug, proceed as follows. The wire which is colored blue
must be connected to the terminal which is marked with N. The wire which is colored brown must be
connected to the terminal which is marked with L.
WARNING:
Never connect live or neutral wires to the earth terminal of the plug. Only fit an approved 13A BS1363/A
plug and the correct rated fuse.
NOTE:
If a moulded plug is fitted and has to be removed take great care in disposing of the plug and
severed cable, it must be destroyed to prevent engaging into a socket
Connec t
Blue to N
(neutral)
Outer sleev e
firmly clamped
Cable grip
Brown L (live)
3 Amp fuse approved
to BS136 2
Summary of Contents for CDT212W
Page 1: ...ORIGINAL INSTRUCTION MANUAL CDT212W 12V LITHIUM ION DRILL DRIVER ...
Page 10: ...EN 10 1 2 3 4 5 6 7 8 9 ...
Page 11: ...EN 11 A A A A C E A F B D ...
Page 20: ......
