BAUKER CDI218W1 Original Instruction Manual Download Page 6

EN-6

a safe way and understand the hazards involved. Children shall not 

play with the appliance. Cleaning and user maintenance shall not 

be made by children without supervision.

If the supply cord is damaged, it must be replaced by the 

manufacturer, its service agent or similarly qualified persons in 

order to avoid a hazard.

ADDITIONAL SAFETY INSTRUCTIONS FOR 

YOUR BATTERY CHARGER

1. Before charging, read the instructions.

2. Do not charge a leaking battery.

3. Do not use chargers for works other than those for which they 

are designed.

4. Before charging, ensure your charger is matching the local AC 

supply.

5. For indoor use, or do not expose to rain.

6. The charging device must be protected from moisture.

7. Do not use the charging device in the open.

8. Do not short out the contacts of battery or charger.

9. Respect the polarity “+/-“ when charging.

10.Do not open the unit and keep out of the reach of children. 

11.Do not charge the batteries of other manufactures or ill-suited 

models.

12.Ensure that the connection between the battery charger and 

battery is correctly positioned and is not obstructed by foreign 

bodies.

13.Keep battery charger’s slots are free of foreign objects and 

protect against dirt and humidity. Store in a dry and frost-free 

place.

14.When charging batteries, ensure that the battery charger is in 

a well-ventilated area and away from inflammable materials. 

Batteries can get hot during charging. Do not overcharge 

any batteries. Ensure that batteries and chargers are not left 

unsupervised during charging. 

15.Do not recharge non-rechargeable batteries, as they can 

overheat and break.

16.Longer life and better performance can be obtained if the battery 

pack is charged when the air temperature is between 18°C and 

24°C

. Do not charge the battery pack in air temperatures below 

Summary of Contents for CDI218W1





















Reviews: