EN-15
exposure level over the total working period.
Helping to minimize your vibration exposure risk.
ALWAYS use sharp chisels, drills and blades.
Maintain this tool in accordance with these instructions and keep well lubricated (where appropriate).
If the tool is to be used regularly then invest in anti vibration accessories.
Plan your work schedule to spread any high vibration tool use across a number of days.
OPERATING INSTRUCTIONS
NOTE:
Before using the tool, read the instruction book carefully.
Intended Use
The machine is intended for driving in and loosening screws as well as for drilling in wood, metal and
plastic.
BEFORE PUTTING INTO OPERATION
A) CHARGING THE BATTERY (SEE FIG. A)
NOTE:
a) Do not use any charger other than that specifically provided for use with the
equipment.
b) If the battery pack is very hot you must remove your battery pack from the
charger and allow time for the battery to cool down before recharging.
c) The battery in your new tool is not charged when it leaves the plant. Therefore
it must be full charged before using the first time
d) Please charge the battery to reach full or no less than half charge before
storage. If the tool will not be used for long periods of time, charge the battery
every 3-6 months.
CHARGING PROCEDURE
1) Plug the charger into an appropriate outlet. The light will be green.
2) Slide the battery pack into the charger, the light will turn to red to indicate the charging process has
started.
3) When charging is completed, the light will turn to green. The pack is now fully charged, unplug the
charger and remove the battery pack.
Warning:
When battery charge runs out after continuous use or exposure to direct sunlight or
heat, allow time for the battery to cool down before re-charging to achieve the full charge.
CHARGING INDICATOR
This charger is designed to detect some problems that can arise with battery packs. Indicator lights
indicate problems (see table below). If this occurs, insert a new battery pack to determine if the charger
is OK. If the new battery charges correctly, then the original pack is defective and should be returned to
a service center or recycling service center. If the new battery pack displays the same problem as the
original Battery Pack, have the charger tested at an authorized service center.
Light
Status
Red on
Charging
Green on
Fully Charged
