21
After Sales Support
Telephone:
1300 884 987
Email: [email protected]
Repeat function/random playback
Press the
T G R G CV
button to enable/disable the repeat function.
Press the
T C P F Q O
button to enable/disable random playback.
Display track information
The
F K U R N C[
button in the
E F 1 W U D
section of the remote control allows you to have track information displayed for each track.
The file name, folder, track title, artist, album and track number are displayed one after another.
FAQ
If errors occur, check first whether you can correct the problem yourself. The following overview may help you.
CAUTION!
Never try to repair the device yourself. Contact our service centre or other qualified personnel if a repair is necessary.
PROBLEM
POSSIBLE CAUSE / REMEDY
GENERAL
No standby display
•
Check the mains connection: is the plug firmly inserted in the mains socket?
The player does not work
•
If the device has been affected by a storm, static charging or other external factor, try the
following procedure: pull out the mains cable and plug it back in.
The disc does not play even
though
/
has been
pressed, or stops again
immediately
•
Is the disc inserted with the title (printed) side facing upwards?
•
Check whether the disc is damaged by trying another disc. If the disc is dirty, clean it carefully,
wiping it from the centre to the edge with a soft, dry cloth.
•
If condensation has formed inside the device: leave the player for one to two hours to dry off.
The device does not respond to
the remote control
•
Check whether the batteries need changing and have been inserted correctly. Remove anything
which may be blocking the signal between the infrared transmitter, the remote control and the
device´s sensor.
•
Is the distance between the remote control and the player too great?
No picture
•
Is the television switched on?
•
Have you selected the video channel on the television?
No sound
Has mute been switched on
?
Cleaning
Always disconnect the device from the mains supply before cleaning it.
Only use a dry, soft cloth to clean the device. Do not use chemical solutions or cleaning products because these may damage the device’s
surface and/or inscriptions.
