20
After Sales Support
Telephone:
1300 884 987
Email: [email protected]
Playing audio or MP3 CDs
Inserting a disc
Make sure that there is about 15 cm of space in front of the disc compartment so that it can open without hindrance.
With the device switched on, press the
or
Q R G P " 1 E N Q U G "
button on the remote control.
Insert a disc into the disk compartment with the title side upwards. Make sure that you place the disc in the middle of the disc holder
so that it does not stick when you close the compartment.
Press the
button. The disc compartment closes.
Playback of the disc starts automatically after a few seconds. You may have to press
/
to start playback.
Readouts in the display
Various playback readouts appear on the audio system display, depending on the medium and the playback status, e.g.:
LOADING
=
content is being read; CD playback: current track, current section, time remaining; playback of other media: current track, time remaining.
Starting/pausing/stopping playback
Start track playback using the
"
button on the device or in the
E F 1 W U D
section on the remote control. To stop playback, press
the button again. Pressing the button once more resumes playback.
The
button stops playback permanently.
Track selection, fast rewind/forward
Press the
button to go back to the start of a specified track. Press the button again to skip to the previous track. The
button
skips straight to the next track.
Hold the
button down to fast rewind within a track or
to fast forward.
Direct track selection
Press buttons
2 / ;
on the remote control to select a track directly. Where the track number is a multi-digit track number, press the +10
button once or multiple times and then enter the track number.
Folder selection
When playing back CDs with MP3 files, these may be saved in various folders for a better overview. You can select these folders on
the device individually in order to play the correct track. This may involve folders and additional sub-folders. The folders are numbered
automatically by the device.
To select a folder, first put the device into folder mode.
Press the
H Q N F G T
button on the remote control.
FOLD
appears on the display.
Using
R T G U G V "
1
select the desired folder.
Using the
or
and
buttons, you can now select and play the track as described.
Press the
H Q N F G T
button again to exit folder mode. The
FOLD
message disappears.
When folder mode is turned off, all music tracks on the data medium are shown and played. The folder structure is ignored. In folder mode,
you can combine the individual tracks and thus only work in specific folders.
Program the playing order of tracks
The program function allows you to compile your own playlist by only selecting specific tracks for playback. You can specify the order in
which the list is played yourself. Proceed as follows:
Press the
" O G O Q T [
button.
Using
R T G U G V
and
R T G U G V
select the desired folder containing the track.
Press
or
and choose the desired track.
Save the track using
G P V G T
.
Repeat these steps until all tracks have been programmed.
A programmed playlist is indicated on the display with
O G O
.
Start the programmed playlist by pressing
.
You can clear a programmed playlist again by pressing
.
