After Sales Support
TEL: 1300 884 987
143 * 210 mm
25.02.2011 09:00
7
Operational Environment
The device can be operated at an ambient temperature of +5° C to +35° C and a relative
humidity of 20% - 85% (non-condensing).
In the switched-off state the LED LCD TV can be stored from -20° C to +60° C.
Keep the device at a distance of at least one metre from high frequencies and magnetic
sources of interference (television, loudspeaker boxes, mobile telephones etc.) to avoid
malfunctioning.
After transporting the LED LCD TV wait until the device has reached ambient temperature
before switching it on.
Large changes in temperature or fluctuations in humidity can cause moisture to build up
due to condensation within the LED LCD TV, which can cause an electrical short circuit.
During thunderstorms or if the device is not going to be used for long periods, remove
the plug from the mains socket and the aerial cable from the aerial socket.
Power Supply
Please note: Even when the mains switch is off some components of the
device are live. In order to disconnect the power to your LED LCD TV or to
completely isolate the device from voltage sources remove the mains plug
from the mains socket.
Only plug the LED LCD TV into an earthed socket with 220-240 V~ 50 Hz. Contact you
electricity provider if you are not sure if the socket is earthed or not.
The socket must be near the LED LCD TV and easily accessible.
In order to disconnect the power to your LED LCD TV or to completely isolate the device
from voltage sources remove the mains plug from the mains socket. Always grab the plug
firmly when unplugging it from the socket. Never pull on the lead.
For extra safety, we recommend using an over-voltage protection device to prevent your
LED LCD TV sustaining damage as a result of power surges or lightning strikes.
If you are using an extension cable, make sure that it complies with VDE requirements. If
in doubt, contact your electrician.
Position the cable so that nobody is able to step on it or trip over it.
Do not place any objects on the cable to avoid damaging it.
