Bauhn MD 21067, Instruction Manual, Page: 33 / 51

After Sales Support TEL: 1300 884 987
143 * 210 mm
25.02.2011 09:00
32
PICTURE Menu
Menu Item Setting
Picture Mode Select picture mode: Standard , Soft , Personal , Dynamic . This
function corresponds to the
P.MODE
button.
The Personal setting lets you set the Contrast , Brightness , Colour ,
Tint and Sharpness yourself. The other parameters are defined.
Contrast
Increase or decrease contrast (on a scale of 0 – 100).
Brightness Increase or decrease brightness (on a scale of 0 – 100).
Colour
Increase or decrease colour (on a scale of 0 – 100).
Tint Hue settings only available for NTSC reception.
Sharpness Increase or decrease sharpness (on a scale of 0 – 10).
Colour Temp
Select colour temperature: Cold , Normal and Warm .
Noise Reduction
This function reduces picture noise and improves image quality when
the signal is weak. Choose between
Off , Low , Middle , High and
Default .
Dynamic CR Switch the dynamic contrast on or off.
HDMI Mode
Precise representation in pixels (
1:1
setting) or enlarged
representation according to the connected HDMI source ( OverScan
setting).
This setting is only available in the HDMI Mode.