v
1300 886 649
Model: ATVUHD48-0417 Product Code: 55230 04/2017
www.tempo.org
AUS
Remote Control (Cont.)
Using the remote control
Inserting batteries
To install the batteries, proceed as follows:
• Open and remove the cover on the back of the
remote control.
• Insert two AAA size batteries according to the polarity
markings (+ / -) inside the compartment. Make sure
the batteries are correctly aligned and properly
pushed into place so they can power the remote
control unit.
• Slide the back cover back into its closed position.
NOTE:
When testing the remote control unit after
replacing the batteries, make sure the TV is
properly connected to the mains power supply.
Battery service life
• The service life of batteries depends on usage and
environmental conditions. They should normally last
for about one year.
• If the remote control fails to work even when it is
operated near the TV, replace the batteries.
Precautions when using batteries
• Do not use old and new batteries together.
• Do not use different types of battery (for example, Manganese and Alkaline
batteries) together.
• Note that there are chargeable and non-chargeable batteries. Do not
attempt to charge non-chargeable batteries.
• Remove the batteries from the remote control unit if you do not intend to
use the unit for a long time.
• When discarding used batteries, follow any guidelines for recycling and
disposal of batteries that apply in your local area.
• Keep batteries away from children and pets.
• Never throw batteries into a fire or expose them to fire or other sources of
extreme heat.
