14
1300 886 649
Model: ATVUHD48-0417 Product Code: 55230 04/2017
www.tempo.org
AUS
Getting Started
IMPORTANT!
Make sure all relevant equipment is properly connected (as
illustrated on the previous pages) before connecting the unit
to a wall socket and turning on the power.
Powering the TV
To turn the power On/Off:
• Plug the power cord into a suitable power point, then turn on the power at
the outlet.
• Press the
STANDBY/ON
button, on the right lower side of the back panel
(or on the remote control, making sure to aim it at the sensor at the front
of the TV); the indicator will glow blue. Press it again to power off (standby
mode); the indicator will glow red.
First use
When you switch on the TV for the first time, the First Time Setup menu will
be displayed on the screen, as illustrated below.
•
Language:
Use the
/
buttons to select your
OSD (on screen display)
language and then use the button to go to the next item.
•
Country:
Use the
/
buttons to select the country you are living in and
then use the button to go to the next item.
•
Time Zone:
Use the
/
buttons to select the time zone you are living in
and then use the
to got to the next menu item.
•
Tune type:
Use the
/
buttons to select the type of scan and then use the
button to go to the next item.
• Press the
OK
button to begin scanning for stations.
• To exit channel tuning, press the
MENU
or the
EXIT
button and use the
/
buttons to select YES, select NO to continue tuning.
• When auto searching is complete, your TV will show the first channel found.
