5
1300 886 649
Model: ATV40-014 Product Code: 48436 11/2014
www.tempo.org
AUS
Installation
IMPORTANT!
• Make sure the TV set is unplugged from the power supply before
installing or removing the stand.
• The TV panel may be awkward to install on your own. We recommend
you ask someone to help with installation and/or removal of the stand.
Your TV is packaged with the stand and the cabinet separated. Before using
the TV, install the stand as described below, or if you want to mount it to a
wall, see page 6 for mounting advice; the wall mount itself is not supplied.
Step 1
Place a soft cushioned material on top of a
flat surface to prevent damaging the screen
panel. Then place the TV monitor flat on
top, with the screen side facing down, as
illustrated on the right (1).
Step 2
Align the Stand with TV bottom and then
force the end of stand until the TV is fully
seated on the stand (2)
Step 3
Tighten the included screws to fix the Stand
Assembly with this TV (3).
CAUTION!
• Make sure that the screws are fastened completely. (If they are not
fastened securely enough, the TV may tilt forward after being installed.)
• Do not fasten the screws with excessive force, otherwise they may
wear out and loosen.
