CONTROLS AND CONNECTIONS | 17
Pairing the wireless subwoofer with the soundbar after first time use
• The subwoofer and soundbar will automatically pair when they are both plugged into the mains sockets and
turned on. No cable is needed for connecting the two.
• Flick the power button on the subwoofer on and the connection indicator will flash blue, meaning it is currently
ready for pairing.
• Turn on the soundbar and it will automatically start pairing with the subwoofer. The connection indicator will light
up blue once connected.
• To turn off the subwoofer, flick the power button off.
• If the wireless connection fails again, check if there is
conflict or strong interference (for example, interference
from an electronic device) around your location.
Remove these conflicts or strong interferences and
repeat the above procedures.
• The subwoofer should be within 6m of the soundbar in
an open area.
For best sound experience, place
the subwoofer on the ground near
the soundbar. The area of around
the subwoofer should be clear of
any obstructions.
