Page 12
For technical questions, please call 1-888-866-5797.
Item 58215
SAFETY
OPERA
TION
MAINTENANCE
SETUP
Installing Splash Guard
1. Press Splash Guard onto Splash Guard Bar,
below the Dust Port, until it snaps in place.
2. When not in use, flip Splash Guard up.
3. To remove, tilt the Splash Guard upward
until it releases from Splash Guard Bar.
Splash
Guard
Installing Guide Wheels
1. Remove Screws from both sides of Base Plate.
2. Loosen the Wing Nut (75) and Bolt (79)
from the Guide Wheel Assembly without
removing Wing Nut all the way.
3. Spread the brackets apart and connect the
Guide Wheel's brackets to both sides of the
handles, in the slots that match the brackets.
4. Tighten Wing Nut to secure
Guide Wheels to handles.
Guide
Wheels
Bolt
(79)
Screw
Base Plate
Adjusting Wheel Guard
1. Loosen the Wheel Guard Knob.
2. Adjust the Wheel Guard so that the closed
end points towards the operator.
3. Securely tighten the Wheel Guard Knob.
Wheel Guard Knob
Wheel Guard
Trigger Lock
1. Squeeze Trigger, then push Trigger Lock forward.
2. Squeeze Trigger to release Trigger lock.
Trigger
Trigger Lock
