2LAN+1POTS+WiFi Dual Mode HGU USER MANUAL
Website : www.baudcom.com.cn Tel: +86 21 37709251 Email:
Page 6
over the optical fiber. Please refer to the Layout Description section of this installation
manual for normal LED activity.
4.
Check all signal levels and services on all the HGU communication ports.
Unit Installation Adjustment
Installing the HGU on a horizontal surface (Bench top)
Put the HGU on a clean, flat, sturdy bench top. You must keep the clearance for all sides of
the unit to more than 10cm for heat dissipation.
Installing the HGU on a vertical surface (Hanging on a wall)
You can install the HGU on a vertical surface by using the mounting holes on the bottom of
the ONU chassis and two flat-head wood screws.
a)
Insert the screws into the wall. The screw positions must be in the same horizontal line and
the distance between them must be 165mm. Reserved at least 6mm between the screw caps
and the wall.
b)
Hang the HGU on the screws through the mounting holes.
2.3 Set up Connection
Set up wired connection
Connect PC with HGU Ethernet port by RJ-45 CAT5 cable.
Set up wireless connection
Choose the wireless network name (SSID) “FTTH-xxxx”, default security mode is WPA2 mixed,
password is
12345678
.
