Saturnino mod. 2010
12
2016
11.
COMPULSORY PERIODICAL MAINTENANCE
(To be carried out exclusively by assistance centres or by the manufacturer)
It is recommended to replace:
1.
the internal safety valve every 2100 hrs. of ironing or maximum 3 years;
2.
the internal thermostat every 2100 hrs. of ironing or maximum 3 years;
3.
the steam tube and the iron cable once they seem damaged (fig. 4);
4.
the safety valve plug every 2500 hrs. or maximum every 3 years (fig. 3).
It is recommended also to clean the boiler from limestone every 2500 hrs. of ironing
or maximum 3 years.
12.
ELECTRICAL RISKS
The following situations are considered dangerous for the operator:
1.
earth protector switch is activated when turning on the machine;
2.
using SATURNINO during thunderstorms;
3.
using SATURNINO without proper protection for feet (without shoes) or with wet
feet;
4.
damaged electrical wires;
5.
when the electric wires touch hot parts of the machine;
6.
iron overheating or loss of water from iron (fig. 4);
7.
washing or cleaning the iron using water (fig. 4);
8.
loss of water from the machine;
9.
filling the boiler when SATURNINO is switched on.
13.
MECHANICAL RISKS
The following situations are considered dangerous for the operator:
1.
using SATURNINO for different purposes other than ironing;
2.
replacing the gasket of the safety valve plug with non-original gaskets.
14.
THERMIC RISKS
The machine can become extremely hot: use it very carefully and disconnect the plug
when not in use.
It is suggest to proceed with the cleaning of the machine only when it is cold.
The following situations are considered dangerous for the operator:
1.
touching the iron base when it is hot;
2.
touching the solenoid valve when SATURNINO is under pressure;
3.
emptying the boiler under pressure or touching the exhaust tap;
4.
touching the safety valve plug when SATURNINO is under pressure;
5.
pointing the steam jet towards people or animals.
