26
Battipav srl
GB
Battipav srl
CAUTION
ONLY QUALIfIED PERSONNEL MAY OPERATE THE
MACHINE
The following steps are advisable:
• During cutting, slide the carriage slowly, and do
not apply an excessive braking force to the disc.
• Ensure that the piece to be cut is properly
supported by the tile clamp.
Warning! When using electric tools, following
safety precautions should always be followed to
reduce the risk of fire, electric shock and personal
injuries. Read and follow all these instructions
before attempting to operate this product and save
them with care!
SAVE THESE INSTRUCTIONS WITH CARE.
Keep your work area perfectly clean
• Cluttered areas invite injuries.
Consider work area environment
• Don’t expose tools to rain.
• Don’t use tools in damp or wet locations. Keep
work area well lit.
• Don’t use tools in presence of flammable liquids
or gases.
Guard against electric shocks
• Prevent body contact with grounded surfaces.
Keep children away!
• Do not let third parties contact tool or extension
cord. All visitors should be kept away from work
area.
Store your tools in a save place
• When not in use, tools should be stored in dry and
save places, out of the reach of children.
Don’t force tool
• It will function better and in a safer way at the rate
for which it was intended.
Use the right tool
• Don’t use low duty tools or accessories to do
the job of a heavy-duty tools. Don’t use tools for
purposes not intended.
Dress properly
• Rubber gloves and non-skid footwear are
recommended when working outdoors. Wear
protective hair covering to contain long hair. Use
safety glasses.
• Use a mask if working operations are dusty.
Don’t abuse cord
- Never carry tool by cord or yank it to disconnect it
from socket.
• Keep cord from heat, oil and sharp edges.
Avoid unsteady positions
• Be sure to work in a safe and balanced position.
Maintain tools with care
• Keep tools sharp and clean for better and safer
performance.
- Follow all maintenance advice and instructions to
replace accessories subject to wear. Inspect tool
cords periodically and, if damaged, have them
repaired by an authorised expert. Check extension
cords periodically and replace them if damaged.
Keep handles dry, clean and free from oil and
grease.
Disconnect tools
• When not in use, before servicing, and when
changing accessories subject to wear.
Remove service keys from tool
• Form the habit of checking to see that keys and
adjusting wrenches are removed from tool before
turning it on.
Avoid unintentional starting
• Be sure that the switch is off when plugging in the
tool.
Extension cords for outdoor works
• When tool is used outdoors, use only extension
cords intended for this particular use and so
marked.
Stay alert
• Watch what you are doing. Use common sense.
Do not operate tool when you are inattentive.
