Rev. A-021210
Page 7
P/N VDC E12248-S2-MNL
BatteryMINDer
®
E12248-AA-S2
A SPARK NEAR THE BATTERY MAY CAUSE BATTERY
EXPLOSION. TO REDUCE RISK OF A SPARK NEAR
BATTERY:
a. Check polarity of battery posts. POSITIVE (POS,P,+) usually
has a large diameter than NEGATIVE (NEG, N, -) battery post.
b. Connect (
RED
) charger clip to (POS+) post of battery.
c. Position yourself and free end of cable as far away from bat-
tery as possible, then connect NEGATIVE (
BLACK
) charger clip
to free end of cable.
d. Do not face battery when making final connections.
e. When disconnecting charger, always do so in reverse
sequence of connecting procedure and break first connection
while as far away from battery as practical.
Do not attempt
to permanently install charger not specifically designed-
approved for permanent installation, especially in a wet
high moisture environment.
