5
5. Attach output cables to the battery and chassis as indicted below. Never
allow the output clamps to touch one another.
a) Check the battery level of the Jump Pack.
b) Insert the smart alligator clip connector into the end of the Jump Pack.
c) Connect the RED positive clip to the positive post on the battery, then
the BLACK negative clip to the negative post on the battery.
d) If connected correctly the LED should turn green. Wait 5 to 10 seconds
then start your vehicle.
e) Remove the clips immediately after the vehicle has started.
1) Do not immerse in water.
2) Do not use or store the VEHICLE JUMP STARTER near sources of fire or
heater.
3) Do not put the VEHICLE JUMP STARTER into a fire or apply direct heat to
it.
4) Do not pierce the VEHICLE JUMP STARTER casing.
5) Do not strike, throw, or subject the VEHICLE JUMP STARTER to severe
physical shock.
6) Do not attempt to modify the VEHICLE JUMP STARTER in any way.
7) Do not place the VEHICLE JUMP STARTER in a microwave oven or
pressurized container.
8) Do not use the VEHICLE JUMP STARTER if it gives off an odor or
generates heat
9) Do not insert any metal object into the cable input opening as this could
cause a spark and electric shock.
10) Do not use the VEHICLE JUMP STARTER as a battery charger or power
supply.
CAUTION
6
Standard USB Output port
5VDC, 2.4Amp
Type – C USB Input port
5VDC, 2Amp
Micro USB Input port
5VDC, 2Amp
Start Current/Peak Current
300Amp/600Amp
Model Part Number
030-1030-PS
Operating Temperature
32° - 104°F
Warranty 1
year
Certification
CEC, DOE, FCC, ICES-001
Transportation UN38.3
Below is a list of items that should be included in your retail box:
1) Vehicle Jump Starter & Portable Power Bank
2) Smart Alligator Clips
3) Ring Terminal Wire Harness
4) Micro USB Charging Cable
5) Carry Bag
6) Instruction Manual
PRODUCT SPECIFICATIONS
PRODUCT OVERVIEW
VEHICLE JUMP STARTER & PORTABLE POWER