Bathroom Butler HTRs are made from GRADE 304 Stainless Steel and should be cleaned regularly with a warm damp cloth, and then buffed
dry with a clean dry cloth. Do not use the rough end of a kitchen sponge to clean your HTR. To remove any small blemishes or fine scratches,
use a metal polish. Remember to switch the HTR off and leave it to cool for 15 minutes before cleaning.
DO NOT clean your HTR with any kind of ACID BASED CHEMICAL, TILE CLEANER or detergents that contain chlorine, as this may
contaminate and damage the surface finish of the HTR.
There is no maintenance required on your Bathroom Butler HTR.
Every member of the Bathroom Butler team would like to sincerely thank you for purchasing this HTR, and would like to wish you
many days of dry, cosy towels ahead!
4b. Using your Heated Towel Rail:
Dry Element Technology
4b. Using your Heated Towel Rail:
Folding your towels
4b. Using your Heated Towel Rail:
Cleaning and Maintenance
The main purpose of an HTR is to dry your towels, which will also add some warmth to your towels at the same time. Bathroom Butler HTRs
have the added benefit of user temperature adjustment, allowing the temperature to be increased or decreased to your individual preference.
This feature is especially useful in making Bathroom Butler HTRs effective in both summer and winter conditions.
The Bathroom Butler HTR has been designed to operate 24/7, which means you can leave your HTR on all day long. However, leaving the
HTR switched on permanently uses unnecessary electricity because, in most cases, your towels will be completely dry within 4 hours of being
hung, depending upon humidity levels and how wet your towel was originally.
Bathroom Butler uses Dry Element Technology (DET) and thanks to the benefit of Rapid Heating, which allows the unit to heat up to working
temperature within a mere 10 to 15minutes, its HTRs can be easily switched ON and OFF without further increasing the electricity consump-
tion.
In order to save as much electricity as possible, the heating element is thread through the shortest path inside the bars of the HTR, which
means that the left-hand post will always be cool to the touch. Don’t be surprised when you find the temperature of the HTR under the towel
is higher than the exposed surfaces. This is called Direct Intelligent Heating, and it means that smaller wattage heating elements can be used,
thereby saving electricity, but still ensuring that your towels are dried effectively.
To ensure that your towels are dried efficiently and effectively, it is important to fold your towels into 4 layers. Just draping your towel over the
HTR is ineffective and will prevent your towel from drying. It is also not advisable for there to be more than 4 layers of towelling on any one bar,
as it will be very difficult for the heat to penetrate beyond the 4 layers.
To fold your towel in to 4 layers is simple
– just fold it in half and then in half again. Now hang the towel over the HTR. When the towel is
hung over the HTR, it is recommended that the bottom end of the towel should not extend more than 150mm below the bottom bar.
