REMEMBER
to place Cover Plate over the
tube before making the electrical connection.
*Drill holes at the 3 mounting points chosen.
*Drill 4mm pilot holes. Open up with 8mm drill.
*Choose mounting points according to particular model
*CHECK that chosen points are correct using assembled HTR.
3c. Mounting:
Drill Holes
3d. Mounting:
Secure Male Mounts
3e. Mounting:
Connect Electrical Wiring
1. DANGER- Electricity is dangerous.
2. Electrical connection must be done by a registered electrician/wireman in
accordance with the relevant Wiring Code.
3. HTRs are deemed to be fixed appliances and therefore are required to have either:
a.
an Isolator Switch installed within arms distance of the heated towel rail.
b.
be connected to a circuit breaker that can be locked in the open position.
4. The HTR must be connected to a circuit with Earth Leakage Protection.
5. Check product rating label voltage and make sure correct voltage is supplied at
electrical point.
Ceramic Tile
Masonry Wall
Ø8mm
(not supplied)
Pilot hole -
Ø4mm
(not supplied)
Sizing hole -
Ø8mm
(not supplied)
*CAUTION:
Before drilling check
for water pipes
(not supplied)
(not supplied)
X 3
X 3