6. O
PERATION
BATCO - T
OP
D
RIVE
F
IELD
L
OADER
6.2. M
ACHINE
B
REAK
-I
N
A
ND
O
PERATION
1300 P, 1500 P S
ERIES
22
P1512121
2. Check the drive and conveyor belt tension and alignment. Tension or align as
required.
6.2.1. D
RIVE
S
ETUP
H
YDRAULIC
D
RIVE
M
ODEL
:
1. Back tractor into position.
2. Chock tractor wheels.
3. Plug hydraulic hoses into tractor couplers. Check flow direction to ensure belt
is moving forward.
E
LECTRIC
M
OTOR
M
ODEL
:
1. Have a certified electrician provide power to the machine.
2. Provide convenient shutdown switches and comply with local electrical
codes.
3. Use a totally enclosed electric motor when conveying in extremely dusty
conditions. Ensure electric motor is properly grounded.
6.2.2. S
TARTING
C
ONVEYOR
H
YDRAULIC
D
RIVE
I
NSTRUCTIONS
1. Place all controls in neutral.
2. Start tractor and run at low idle.
3. Engage hydraulic control lever and increase engine speed to desired speed.
Note:
The correct operation of hydraulic systems is directly linked to the pump’s ability
to supply the correct oil flow and pressure. If you cannot obtain the correct belt
speed, check with the dealer to ensure the power unit is delivering the correct oil
volume and pressureElectric Drive
1. Turn the electric motor ON..
WARNING
Anchoring and/or support of the conveyor
during operation is necessary. When
emptying the conveyor, the weight balance
transfers to the upper end of the machine,
which can cause upending.
CAUTION
Conveyor should not be left in a raised
position for extended periods of time. Fully
lower conveyor to prevent the risk of damage
or personal injury.
