9
English
ment of the carbon brushes may only
be undertaken by a professional. Only
identical replacement parts may be
used! For further information please
contact our customer service
department.
• Always keep the ventilation slots
(6)
open and clean. After each use remove
dirt and contaminations with a brush or
blow it out with compressed air.
• If increased brush fire occurs this indi-
cates that the carbon brushes are worn
and should be replaced. Have the
brushes replaced by a professional.
16. Technical data
Rated Voltage: . . . . . . . . . 230 V~ 50 Hz
Rated Power: . . . . . . . . . . . . . . . 250 W
No Load Speed: . . . . . 6000 – 11000 min
-1
Eccentricity: . . . . . . . . . . . . . . . 1 mm
Sanding Surface : . . . . . . . .187 x 90 mm
Dimensions of Sanding Paper: 230 x 90 mm
Length of Power Cord. . . . . . . . . . . 3 m
Weight: . . . . . . . . . . . . . . . . . 1.83 kg
Sound Pressure Level (L
pA
) . . . . . 66 dB(A)
Uncertainty (K
pA
). . . . . . . . . . . . 3 dB(A)
Sound Power Level (L
WA
): . . . . . . 77 dB(A)
Uncertainty (K
WA
) . . . . . . . . . . . 3 dB(A)
Hand/Arm Vibration . . . . . . . . 6.07 m/s
2
Uncertainty (K). . . . . . . . . . . . .1.5 m/s
2
Protection Class . . . . . . . . . . . . . . . . II
17. Vibration level
The vibration emission level stated in this
instruction manual has been measured in
accordance with a standardised test given
in EN 60745; it may be used to compare one
tool with another and as a preliminary
assessment of exposure to vibration when
using the tool for the applications
mentioned
• using the tool for different applications,
or with different or poorly maintained
accessories, may significantly increase
the exposure level
• the times when the tool is switched off
or when it is running but not actually
doing the job, may significantly reduce
the exposure level
Protect yourself against the effects of vibra-
tion by maintaining the tool and its accesso-
ries, keeping your hands warm, and organiz-
ing your work patterns.
18. Disposal
Do not dispose of electric power
tools with domestic refuse.
The electric power tool is shipped
in packaging to reduce transport damage.
This packaging is a raw material and as
such can either be reused or can be fed
back into the raw material cycle. The elec-
tric power tool and its accessories are
made from various materials such as met-
als and plastics. Take defective compo-
nents to a special refuse collection point.
Ask about these at your specialist shop or
local council.
19. EC-Declaration of conformity
We, the
Batavia GmbH, Weth. Buitenhuis-
straat 2a, NL-7951 SM Staphorst,
declare
by our own responsibility that the product
Finishing sander, Item-No 7062853, Model
Nr. BT–FS002
is according to the basic
requirements, which are defined in the Euro-
pean Directives
Electromagnetic Compati-
bility 2014/30/EU (EMC), 2006/42/EC
(Machinery)
and their amendments. For the
evaluation of conformity, the following har-
monized standards were consulted:
EN 60745-1:2009+A11:10
EN 60745-2-4:2009+A11:11
EN 55014-1:2006/+A1:2009/+A2:2011
EN 55014-2:2015
EN 61000-3-2:2014
EN 61000-3-3:2013
Staphorst, 19 February 2017
Meino Seinen, QA Representative
Batavia GmbH, Weth. Buitenhuisstraat 2a,
7951 SM Staphorst, Netherlands
The product and the user manual may be
subject to changes. Technical data may be
changed without prior notice.
7062853-Finishing-Sander-250W-Ma-0-Book-1705-15.indb 9
29-12-17 10:12
