7
English
f. Keep cutting tools sharp and clean.
Properly maintained cutting tools with
sharp cutting edges are less likely to
bind and are easier to control.
g. Use the power tool, accessories and
tool bits etc., in accordance with these
instructions and in the manner
intended for the particular type of
power tool, taking into account the
working conditions and the work to be
performed.
Use of the power tool for
operations different from intended
could result in a hazardous situation.
3.5
Service
a. Please use a qualified expert who
uses original replacement parts to
repair your power tool.
This will ensure
proper functioning of the power tool.
4. Additional safety warnings for
finishing sanders
Contact with or inhalation of dust
coming free during use (e.g. lead-
painted surfaces, wood and metal)
can endanger your health and the
health of bystanders. Always wear
appropriate protective equipment,
such as a dust mask. Always use
proper dust extraction during use.
• Do not work materials containing
asbestos. Asbestos is considered
carcinogenic.
• Do not use the machine for sanding
magnesium workpieces.
• Wear safety goggles, hearing protection
and if necessary other protective
means, such as safety gloves, safety
shoes, etc.
• Be very careful when sanding painted
surfaces.
• Before use, remove all nails and other
metal objects from the workpiece.
• Make sure that the workpiece is prop-
erly supported or fixed.
• Only use sanding paper that is suitable
for use with the machine.
• Only use sanding paper with the correct
dimensions. Make sure that the sanding
paper is properly mounted.
• Inspect the sanding paper before each
use. Do not use sanding paper that is
worn because of prolonged use.
• Never put the machine down on a table
or a workbench before it has been
switched off.
5. Electrical safety
Always check that the voltage of
the power supply corresponds to
the voltage on the rating plate.
• Do not use the machine if the mains
cable or the mains plug is damaged.
• Only use extension cables that are suit-
able for the power rating of the machine
with a minimum thickness of 1.5 mm
2
.
If you use a extension cable reel, always
fully unroll the cable.
6. Contents of packing
1x Finishing sander
1x Sanding Paper
1x Dust Collection Box
1x Instruction manual
7. Before the first use
Remove the machine and all accessories
from the package. Keep the packaging
materials out of the reach of small children.
There is a danger of suffocation!
8. Intended use
The finishing sander is intended for sanding
wood, plastic, stone, composites, paint,
filler, and similar materials.
Metal and materials containing asbestos
must not be worked with the finishing
sander. The finishing sander is only
intended for dry sanding.
9. Selecting the sanding paper
• Always use abrasive papers suited to
the material you want to sand. The
papers must have the correct grain size.
The grain is either Corundum or
Carbide.
• Depending on grain size there are
degrees of coarseness. The coarseness
is specified by a number on the back of
7062853-Finishing-Sander-250W-Ma-0-Book-1705-15.indb 7
29-12-17 10:12
