17
EN
Charging starts automatically.
Charging is finished when all three
blocks of the battery icon on the
bottom left of the display appear.
Note: When the battery runs low,
the camera automatically switches
off. In that case, connect the
camera with a power supply and
recharge the battery (via cigarette
lighter adapter in the car, PC,
etc.).
FUNCTIONAL DESCRIPTION
I. Switching on and off the
Camera
1. Press the POWER key (13) to
switch on the camera.
2. Press the OK key (11). The
camera starts recording in the
selected mode (Setting up the
video recording configuration:
refer to chapter II.).
3. Press the mode selection key
(5) to switch from the video
recording mode into the photo or
audio recording mode,
respectively to switch into the
play back mode
(press OK once = photo
shooting mode,
twice = audio recording mode,
three times = play back mode,
four times = return to video
recording mode).
4. Press and hold the POWER key
(13) for three seconds to switch
off the camera manually.
II. Setting up the Video
Recording Configuration
Press the MENU key (12) in video
or photo recording mode to display
the setup menu of the camera.
Use the UP (6) and DOWN (7)
keys to vertically navigate through
the menu items.
1. Movie Size: Press the OK key
(11) and select the desired video
resolution FHD, HD, D1 or 640.
Use the UP (6) and DOWN (7)
keys to vertically move the
highlighted menu item. Use the
OK key (11) to confirm the
selection (Menu navigation and
confirmation of the selected
menu items are identical for the
following sub menus.).
2. Date Stamp: Select whether the
time and date information should
be added to the video or not
(refer to chapter IV.5 for setting
up date and time.).
3. Motion Detection: Select whether
the camera should automatically
start shooting video or not when
the sensors detect motion.
4. Loop Rec: Select whether the
previously recorded files should
7061309 Ma # 1202-07.indd 17
07-02-12 13:37