GB
|
11
• Repairs to electrical parts should only be carried out at an authorized customer service centre.
• Do not use spray guns to spray flammable liquids.
• Do not clean spray guns with flammable solvents.
• Take precautionary measures against potential hazards from spray liquid and follow any instructi-
ons given on containers or laid down by the manufacturer of liquid.
• Do not spray any liquids of unknown hazard potential.
• Keep work area clean and will lit.
• Do not operate power tools in explosive atmosphere, such as in the presence of flammable liquids,
gases or dust.
• Keep children and bystanders away while operating a power tool.
• Power tool plugs must match the outlet. Never modify the plugs in any way. Do not use any adap-
ter plugs with earthed (grounded) power tools.
• Avoid body contact with earthed or grounded surfaces such as pipes, radiators, ranges and refrige-
rators.
• Do not expose power tools to rain or wet conditions.
• Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool. Keep
cord away from heat, oil, sharp edges or moving parts.
• When operating a power tool outdoors, use an extension cord suitable for outdoor use.
• Stay alert, watch what you are doing and use common sense when operating a power tool. Do not
use a power tool while you are tired or under the influence of drugs, alcohol or medication.
• Use safety equipment. Always wear eye protection.
• Avoid accidental starting. Ensure the switch is in the off position before plugging in.
• Remove any adjusting key or wrench before turning the power tool on.
• Do not overreach. Keep proper footing and balance at all times.
• Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing and gloves away
from moving parts.
• If devices are provided for the connection of dust extraction and collection facilities, ensure these
are connected and properly used.
• Do not force the power tool. Use the correct power tool for your application.
• Do not use the power tool if the switch does not turn in on and off.
• Disconnect the plug from the power source before making any adjustment, changing accessories,
or storing power tools.
• Store idle power tools out of the reach of children and do not allow persons unfamiliar with the
power tool or these instructions to operate the power tool.
• Maintain power tools. Check for misalignment or binding of moving parts, breakage of parts and
any other condition that may affect the power tools operation.
If damaged, have the power tool repaired before use.
• Use the power tool, accessories and tool bits etc, in accordance
with these instructions and in the manner intended for the
particular type of power tool, taking into account the working
conditions and the work to be performed
• Have your power tool serviced by a qualified repair person using
only identical replacement parts.
•
Forbidden to spray to the hatch of the motor and etc.
•
When spraying normally, the motor should not be under the
head of the gun and the container.
