Bastian Solutions BRBAC 1 HP, Installation And Maintenance Manual

Page: 43 / 48

Installation & Maintenance Manual: BRBAC 1 HP
Published December 2019 Rev.A1
43
8 Spare Parts
Table 2 refers to general spare parts for a BRBAC. Please refer to Appendix 1 for general arrangements
that contain specific spare part lists for each section and configuration.
Table 2: General spare parts list for BRBAC
DESCRIPTION COMMON CONFIGURATIONS
IDLER ROLLERS 1.9” OD, NO GROOVE, MULTIPLE WIDTHS
SNUB ROLLERS 2.5” OD, NO GROOVE, MULTIPLE WIDTHS
DRIVE PULLEY 1 HP DRIVE CONFIG, 6in OD, MULTIPLE WIDTHS
TAKE-UP PULLEY 1 HP DRIVE CONFIG, 4” OD, MULTIPLE WIDTHS
TAIL PULLEY 1 HP TAIL CONFIG, 2.4” OD, MULTIPLE WIDTHS
DRIVE PULLEY BEARING 1 HP DRIVE CONFIG, 1 1/4 ” BORE
TAKE-UP PULLEY BEARING 1 HP DRIVE CONFIG, 1 1/4 ” BORE
POP-OUT ROLLER 1” OD, NO GROOVE, MULTIPLE WIDTHS
DRIVE MOTOR DODGE GEARMOTOR, MULTIPLE GEAR RATIOS
AC BELT
ROUGH TOP BELT, MULTIPLE WIDTHS. CUSTOM LENGTH
LONGITUDINGAL RIB BELT, MULTIPLE WIDTHS, CUSTOM LENGTH
BRUSHED TOP BELT, MULTIPLE WIDTHS, CUSTOM LENGTH
GLIDE TOP BELT, MULTIPLE WIDTHS, CUSTOM LENGTH
Appendix 1 Spare Parts - General Arrangements
Please find attached general arrangements for BRBAC conveyor sections.