Battery Charger MVD
User's Manual
4. PROGRAMMING
PRELIMINARY CONTROLS
Before to proceed with the programming sequence and before to connect a battery, make sure
that the MVD charger has been installed by a qualified electrician, according with the
instructions reported in this manual.
Before to use the charger, it's necessary to control that the ventilation slots are not obstructed,
and that all the safety precautions reported in this manual are respected.
STARTUP SEQUENCE
Turn on the charger by moving the main switch to position “1”.
The charger will perform an automatic test of the control circuits, and will wait for a random
delay on start. (ONLY AFTER A BLACK/OUT HAPPENS)
The display will visualize the following messages.
MVD-BASSI
Page 7 of 34
SYSTEM READY
MAX xxx V – xxx A
BASSI
CHARGER MVD
SYSTEM CHECK
PLEASE WAIT ...
XX.X V
XXXX Ah
EL= XXX
PROG.XX
