Basler daA1280-54um, Manual, Page: 8 / 11

2018/2/9 daA1280-54um
https://docs.baslerweb.com/?filter=Camera:acA2500-14gm#t=en%2Fdaa1280-54um.htm 8/11
0–0.7 VDC Indicates a logical 0 (with inverter disabled).
1.8–3.4 VDC Indicates a logical 1 (with inverter disabled).
Maximum input leakage current: 10
μ
A
Internal pull-up resistor: 25 k
Ω
typical, 7 to 41 k
Ω
.
To increase the voltage allowed on the I/O input lines, attach the optional dart I/O
board to the camera. The I/O board makes the camera compatible with TTL input
signals.
Operation as Output
Voltage Description
3.4 VDC
Absolute maximum. This voltage must never be exceeded. Doing so
may damage the camera and voids the warranty.
0–0.5 VDC Indicates a logical 0 (with inverter disabled).
2.4–3.3 VDC Indicates a logical 1 (with inverter disabled).
Maximum current allowed through the output circuit: 2 mA
Circuit Diagrams
→
See Circuit Diagrams for Basler dart Cameras .
Cable Requirements
USB 3.0 Cable
Use a high-quality USB 3.0 cable with a USB 3.0 Micro-B plug.
Do
not use cables with a USB 1.x/2.0 Micro-B cable plug, even if you are connecting
the camera to a USB 2.0 port. Otherwise, the camera may not work properly.
To avoid EMI , cables must be shielded, as speci ed in the USB 3.0 standard.
Basler recommends using USB 3.0 cables from the Basler Vision Components
range.
For more information, see the Recommended Accessories for Basler USB 3.0 Cameras
document.