Basler daA1280-54um, Manual, Page: 11 / 11

2018/2/9 daA1280-54um
https://docs.baslerweb.com/?filter=Camera:acA2500-14gm#t=en%2Fdaa1280-54um.htm 11/11
Preset: Input line
4 Line 2
General purpose I/O (GPIO) line
Preset: Input line
5 - Not connected
6 - Not connected
I/O Board
The dart I/O board is available from Basler. It has the following bene ts:
Offers additional I/O connectors instead of the single standard I/O connector.
Increases the voltage allowed on the I/O input lines (TTL compatibility).
Allows you to trigger multiple dart USB 3.0 cameras simultaneously.
Protects the dart camera against short circuits.
The board can be mounted on the back of the Basler dart circuit board. The connectors
of the I/O board replace the standard I/O connector of the Basler dart.
Contact your Basler sales representative to order the dart I/O board.
For more information, see the dart I/O board Technical Speci cation .
Precautions
→
See Safety Instructions for Basler dart Cameras .
Installation
→
See Camera Installation .
Features
→
See the camera features section .
Suggestions for improving the documentation? Send us your feedback on this topic .
For technical questions, please contact your local distributor or use the support form
on the Basler website.