2018/2/9
daA1280-54um
https://docs.baslerweb.com/?filter=Camera:acA2500-14gm#t=en%2Fdaa1280-54um.htm
10/11
Status LED
Indicates camera operation:
LED is blinking slowly: Camera is being con gured.
LED is lit permanently: Camera is con gured and operative.
LED is blinking rapidly: Internal error.
The LED can be turned off permanently by setting the
USB 3.0 Connector
The camera's USB 3.0 connector is a standard Micro-B USB 3.0 connector. It provides a
USB 3.0 connection to supply power to the camera and to transmit video data and
control signals.
Connection assignments and numbering adhere to the Universal Serial Bus 3.0 standard.
The recommended mating connector is any standard Micro-B USB 3.0 plug.
Depending on how you integrate the Basler dart into your system, you
must select a corresponding USB 3.0 connector that matches the
orientation of the dart USB 3.0 connector in the mounted position. The
orientation of the USB 3.0 connector is shown in the gure above.
I/O Connector Pin Numbering and Assignments
Pin
Line
Function
1
3.3 VDC; max. 20 mA
Power output. Do not apply any external voltage.
2
Ground
3
Line 1
General purpose I/O (GPIO) line