Basler BE1-50BF, Instruction Manual

Page: 15 / 47

9190600990 Rev F BE1-50BF General Information 1-5
Table 1-2. Power Supplies
Input Voltage
Type
Nominal Range
Burden at Nominal
J (mid range)
125 Vdc
120 Vac 24 to 150 Vdc
90 to 132 Vac 5.0 W
12.2 VA
K (mid range) 48 Vdc 24 to 150 Vdc 4.8 W
L (low range) 24 Vdc
12 to 32 Vdc
∗
4.9 W
Z (high range)
250 Vdc
240 Vac 68 to 280 Vdc
90 to 270 Vac 5.3 W
14.4 VA
∗
Type L power supply may require 14 Vdc to begin operation. Once operating, the voltage may be
reduced to 12 Vdc.
Output Circuits
Resistive Ratings
120 Vac: Make, break, and carry 7 Aac continuously
250 Vdc: Make and carry 30 Adc for 0.2 s, carry 7 Adc continuously, and
break 0.3 Adc
500 Vdc: Make and carry 15 Adc for 0.2 s, carry 7 Adc continuously, and
break 0.3 Adc
Inductive Ratings
120 Vac, 125 Vdc, 250 Vdc: Break 0.3 A (L/R = 0.04)
Isolation
In accordance with IEC 255-5 and ANSI/IEEE C37.90, one minute dielectric (high potential) tests as
follows:
All circuits to ground: 2,121 Vdc
Input to output circuits: 1,500 Vac or 2121 Vdc
Radio Frequency Interference (RFI)
Maintains proper operation when tested for interference in accordance with IEEE C37.90.2-1987,
Standard Withstand Capability of Relay Systems to Radiated Electromagnetic Interference from
Transceivers.
Surge Withstand Capability
Qualified to ANSI/IEEE C37.90.1-1989 Standard Surge Withstand Capability (SWC) Tests for Protective
Relays and Relay Systems.
Fast Transient
Qualified to ANSI/IEEE C37.90.1-1989.
Impulse Test
Qualified to IEC 255-5.
Temperature
Operating Range
-40
°
C (-40
°
F) to 70
°
C (158
°
F)
Storage Range
-65
°
C (-85
°
F) to 100
°
C (212
°
F)