Smoothie Maker
K048
Instructions for Use
Please read and retain these instructions for future reference
v01: 09/08/21
•
DO NOT LET THE POWER CABLE HANG OVER THE EDGE OF A TABLE OR COUNTER, OR TOUCH HOT
SURFACES.
•
DO NOT PLACE ON OR NEAR HEAT SOURCES.
•
USE ON A LEVEL, STABLE SURFACE.
•
DO NOT COVER THE ITEM IN ANY WAY WHEN IN USE AS THIS MAY CAUSE OVERHEATING.
•
DO NOT USE THIS APPLIANCE FOR ANY OTHER USE THAN THE INTENDED USE IT IS DESIGNED FOR.
•
ENSURE THERE IS SUFFICIENT DISTANCE BETWEEN THIS APPLIANCE
AND OTHER ITEMS ON THE
WORK SURFACE OR WORK STATION, OR SUFFICIENT DISTANCE BETWEEN THE APPLIANCE AND THE
CONFINES OF THE AREA IN WHICH IT IS SITUATED. WE RECOMMEND A MINIMUM CLEARANCE
AROUND ALL FACES OF AT LEAST 10CM.
•
TO PROTECT AGAINST ELECTRIC SHOCK, DO NOT IMMERSE POWER CABLE, PLUG OR APPLIANCE, IN
WATER OR ANY OTHER LIQUID.
•
UNPLUG FROM OUTLET WHEN NOT IN USE AND BEFORE CLEANING.
•
DO NOT OPERATE ANY APPLIANCE WITH A DAMAGED POWER CABLE OR PLUG OR AFTER THE
APPLIANCE MALFUNCTIONS, OR HAS BEEN DAMAGED IN ANY MANNER. WE RECOMMEND THAT THE
POWER CABLE IS NOT KINKED OR STORED IN A TWISTED MANNER, AND THAT YOU REGULARLY
CHECK ITS CONDITION.
•
ANY REPAIRS MUST BE CONDUCTED BY A QUALIFIED ELECTRICIAN OR ELECTRICAL SERVICE AGENT.
•
DO NOT LEAVE UNATTENDED.
•
ALWAYS SWITCH OFF AFTER COOKING OR IF YOU HAVE TO LEAVE THE ROOM.
•
THE USE OF OVEN GLOVES IS RECOMMENDED WHEN HANDLING HOT FOOD OR HOT GRILL.
•
ALLOW TO COOL BEFORE CARRYING OR PLACING IN STORAGE.
•
BLADES ARE SHARP. USE EXTREME CAUTION WHEN HANDLING THE BLADES. ALWAYS HOLD THE
BLADES BY THE BASE OF THE BLADE ASSEMBLY. BLADES SHOULD ONLY BE REMOVED BY AN
ADULT.
•
AVOID ANY CONTACT WITH MOVING PARTS.
•
NEVER OPERATE THE APPLIANCE WHEN IT IS EMPTY AND WITHOUT LIQUIDS OR INGREDIENTS IN
THE SMOOTHIE MAKER.
•
DO NOT PROCESS HOT FOODS OR HOT LIQUIDS.
•
NEVER ATTEMPT TO REMOVE THE CUP WHILE THE APPLIANCE IS STILL RUNNING.
•
NEVER LEAVE THE APPLIANCE UNATTENDED WHILE IN USE.
•
TO AVOID WATER LEAKAGE OR CUP LOSS, THE BLADE BASE AND CUP MUST BE TIGHTENED VERY
WELL AND THE SEAL RING MUST BE INSTALLED.
•
DO NOT TOUCH INNER BUILT-IN SWITCH BY HAND BEFORE THE CUP IS FITTED INTO THE MAIN
BODY. DO NOT DIRECTLY RUN THE BLADE COMPONENNTS USED ON THE MAIN BODY AND DONOT
TOUCH ROTATING PARTS WHEN IN USE.
•
DO NOT PUT YOUR FINGERS OR UTENSILS (ESPECIALLY SPOONS) INTO THE CUP AFTER THE
MACHINE IS POWERED ON.
•
THIS APPLIANCE IS EQUIPPED WITH OVERHEATING PROTECTION. THE MACHINE WILL STOP
OPERATING WHEN IT IS OVERHEATED. THE POWER MUST BE SWITCHED OFF AND THE SMOOTHIE
MAKER CAN BE RESTARTED AFTER 20 MINUTES.
