GF Health Products, Inc. - www.grahamfield.com Liberty Service Manual 999-0822-190F AUG. 2014
21
OPTIONAL “FIXED” ASSIST BAR INSTALLATION - HEAD END
KIT ZA80300 (Includes One Assist Bar and Hardware Bag)
ASSIST BAR
999-0803-902G
SHOWN AT HEAD-END
ON RIGHT SIDE OF BED
(Hardware Bag = 999-0803-905
includes both quick release and
fixed hardware options)
WARNING: When assessing the Risk of Entrapment, you
need to consider your bed, mattress, headboard and footboard,
assist devices (i.e. rails and assist bars) and other accessories
as an entire system. All bed systems are evaluated for full
compliance to the FDA/CDRH “Hospital Bed System
Dimensional and Assessment Guidance to Reduce Entrap-
ment” guidelines.
It is extremely important to review the resident/patient’s
physical and mental conditions and initiate an appropriate
individual care plan to address any entrapment risks. Please
see page 7 for further information.
!
LIBERTY SERIES
INSTALLATION
1. With the Assist Bar (#1) bracket facing inward toward
the bed as shown, align the two large holes on the
bracket with the two holes in the head deck’s welded
mounting bracket.
2. For the Quick Release (Option 1), insert the two Clevis
Pins of the two Lanyard Assemblies (#2a) from the
outside through the Assist Bar bracket and mounting
bracket holes.
Insert the Hair Pins on the opposite end of the Lanyard
Assemblies (#2b) into the small holes at the ends of the
clevis pins.
3. For the Fixed Bar (Option 2 - bottom of page), insert the
two cap screws (#3) from the outside through the Assist
Bar bracket and mounting bracket holes. Secure screws
by attaching two Thin Nylon Lock Nuts (#4) and tighten
using two 13/16 wrenches.
QUICK RELEASE
OPTION 1
HEAD END
FIXED ATTACHMENT
OPTION 2
HEAD END
2a
2a
2b
2b
