GF Health Products, Inc. - www.grahamfield.com Liberty Service Manual 999-0822-190F AUG. 2014
10
HEAD- AND FOOTBOARD (PANEL) ASSEMBLY
LIBERTY SERIES
HEADBOARD
FOOTBOARD
1. Assemble four inserts (#4) into the outside of both the headboard and footboard if not already
pre-assembled.
2. Assemble a right-hand and a left-hand Board Mounting Bracket (#2 & #3) to the insides of both
the headboard and footboard using four 1/4-20 x 20mm Hex Drive JCB-B Bolts (#5) for each
board. The bolts will go through the four pre-drilled holes on each board into the inserts.
3. Slide the headboard and footboard (with mounting brackets) into the main frame rails.
a) For a 76” bed, align the holes in the brackets with the second holes from the end in the sides
of the main frame rails (See Detail A).
b) For an 80” bed, align the holes in the brackets with the first holes from the end in the sides of
the main frame rails (See Detail A).
4. From the outside of the main frame rails, insert a 5/16 x 1.50” Clevis Pin (#6) through the holes
in the frame rails and brackets on both sides of the bed.
5. Secure the clevis pins by inserting a 1-9/16 Hair Pin Clip
(#7) through each of the holes in the ends of the four pins.
HEADBOARD-
MOUNTING
FOR 80” BED
DETAIL B
MOUNTING
FOR 76” BED
NOTE: To order a new Panel Mounting Kit, please use part # 999-0822-000. Kit includes a right-hand and left-hand
Mounting Bracket, 8 Hex Drive Bolts, 4 Clevis Pins, 4 Hair Pin Clips, and 1 Hex Allen Wrench. Both Panels (Head-
board and Footboard) are sold separately.
FOOTBOARD-
MOUNTING
FOR 80” BED
