IFX-21 User Guide
BASF
Installation and Commission
7/12/2019
V004
6 of 22
M
OUNTING
The IFX-21 is intended to mount on a 35mm top hat style DIN rail (IEC 60715 TH35). To
ensure optimal performance the IFX-21 should be mounted on a grounded rail inside an
enclosure with the appropriate NEMA rating for the environment. Where appropriate cooling
air and/or radiation shielding should be installed to ensure ambient temperatures remain within
device operational limits (see Section 7.1).
In choosing a mounting location note should be taken that the device power, analog output,
and pyrometer ports are located on the top of the device while communications, both Ethernet
and Modbus, are on the bottom.
4.3.1. D
IMENSIONS
F
IGURE
3:
D
EVICE
D
IMENSIONS
4.3.2. I
NSTALLATION PROCEDURE
F
IGURE
4:
I
NSTALLATION STEPS
1. Pull down on spring clip
2. Hook top DIN rail forks over 35mm DIN rail
3. Release spring clip
