• Make sure there are at least 50 cm between the diffusor and illuminated surfaces
(especially easily flammable objects such as curtains).
• The product may not be mounted in or under water.
• Do not operate the product if the frosted glass is missing or damaged.
• Do not touch the product during use. First, turn off the product and let it cool down
sufficiently. Failure to do so poses a risk of burning!
• Protect the product from extreme temperatures, strong jolts, flammable gases,
vapours and solvents.
• Do not place the product under any mechanical stress.
• If it is no longer possible to operate the product safely, take it out of operation and
protect it from any accidental use. Safe operation can no longer be guaranteed
if the product:
- is visibly damaged,
- is no longer working properly,
- has been stored for extended periods in poor ambient conditions or
- has been subjected to any serious transport-related stresses.
• Please handle the product carefully. Jolts, impacts or a fall even from a low height
can damage the product.
• For installations in industrial facilities, follow the accident prevention regulations
for electrical systems and equipment of the government safety organization or the
corresponding authority for your country.
• Consult an expert when in doubt about operation, safety or connection of the
device.
• Maintenance, modifications and repairs are to be performed exclusively by an
expert or at a qualified shop.
• If you have questions which remain unanswered by these operating instructions,
contact our technical support service or other technical personnel.
Preparing installation
Installation of the product must be carried out by a qualified professional (i.e. an
electrician) who is familiar with all applicable regulations!
When handling mains voltage improperly, you will not only endanger yourself but
also others!
If you do not have the relevant expert knowledge, do not install the product yourself,
but have it done by an expert.
• Install the product to an even, stable surface only (i.e. a ceiling, roof overhang, a cement
wall, etc.).
• Item no. 559521: Should you install the product vertically on a wall, please note that the
rubber gasket for the feeder must face upward.
• The product is suitable for use in unprotected outdoor areas. It must however not be used in
or under water. This poses a risk of fatal injury due to electric shock!
• Never mount the product in the vicinity of easily flammable materials (i.e. curtains, fabrics,
etc.). Make sure there is sufficient room for ventilation around the product.
• Do not mount the product to or inside vehicles.
• Use a VDE-approved, waterproof feeder only. Observe the information contained under
Technical Data.
• When mounting the product, take into consideration the routing of the mains cable.
• Only use a suitable, fixed mains cable for power supply.
• A suitable switch is required for turning the product on and off.
• The product must be secured via an existing sub-distribution unit with a 10/16A fuse. This
setup requires the installation of an upstream residual current circuit breaker (FI switch).
• The product must be completely free of voltage for installation. Just turning off the light via the
switch does not make it entirely voltage-free.
• Turn off the corresponding circuit breaker and/or automatic fuse to remove all voltage from
the power circuit. Secure them against unauthorized restart, e.g. by installing a warning sign.
Also switch off the relevant circuit breaker in order to disconnect all poles of the mains cable
from the mains supply.
• Check the power circuit for any remaining voltage using an appropriate measuring device.
Operating instructions
Version 08/14
Moisture-proof lamp E27, 40 W, IP54
Item no. 559521
square
Item no. 559523
round
Intended use
This product is suited for indoor and outdoor installation (protection class IP54) and serves as
a source of light.
For safety and approval purposes (CE), you must not rebuild and/or modify this product. If you
use the product for purposes other than those described above, the product may be damaged.
In addition, improper use can cause hazards such as short circuiting, fire, electric shock etc.
Read the instructions carefully and keep them. Make this product available to third parties only
together with its operating instructions.
This product complies with the statutory national and European requirements. All company
names and product names are trademarks of their respective owners. All rights reserved.
Delivery content
• Moisture-proof lam
• 2 x Mounting screws
• 2 x Dowels
• 2 x Washers (only item no. 559521)
• 3 x Silicone sleeve
• Operating instructions
Explanation of symbols
This symbol indicates a health hazard, e.g. electric shock.
The exclamation mark indicates specific risks associated with handling, function and
use.
The “arrow” symbol indicates special tips and operating information.
Protection type IP54 (splash-proof): The product is suitable for outdoor use
.
0.5m
This symbol determines the minimum distance to illuminated surfaces.
Replace the protective cover if it is damaged.
Follow all instructions in the operating instructions.
Safety instructions
Read the operating instructions carefully and especially observe the safety
information. If you do not follow the safety instructions and information
on proper handling in this manual, we assume no liability for any resulting
personal injury or damage to property. Such cases will invalidate the warranty/
guarantee.
• The device is not a toy. Keep it out of the reach of children and pets. This poses a
risk of fatal injury due to electric shock!
• Do not leave packaging material lying around carelessly. These may become
dangerous playing material for children.
• Operate the product only via a common household power supply of
220 – 240 V/AC, 50 Hz.
• The product is only suitable for fixed installation.
• Never point a garden hose at the product.
