Error
Possible cause
Solution
The parking aid does not
switch on.
The reverse gear is not
engaged.
Engage the reverse gear
No ignition voltage.
Switch the ignition on.
Wrong cabling.
The fuse is defect.
Check the plug connections
and the flat fuse of the
voltage supply.
The lateral slider is in the
“OFF” position.
Put the slider on “ON, Lo
or Hi”.
The display shows wrong
distance values and a signal
sounds although there is
enough room.
Program error
Disengage the reverse gear
and engage it again (reset).
The sensors are very dirty.
Clean the sensors regularly
Repairs other than those described should only be carried out by an authorised
specialist.
It is forbidden to dispose of it in the domestic waste!
9. Care and Cleaning
Do not use any aggressive cleaning agents, rubbing alcohol or other chemical
solutions as they can cause damage to the housing and malfunctioning.
• Disconnect the product from the mains before each cleaning.
•
Clean the outer sensors regularly to avoid malfunctioning. Clean the display with a clean,
damp and lint-free cloth without abrasive of chemical cleaners.
27
