Baseband Technologies Inc.
Title: Stamp-size Ultra Low-Power GPS Receiver Module User Guide Rev 1.0
Page 7
3
Quick Start Guide For the Stamp Module
3.1
Overview
This section describes how to setup the Stamp Module to allow it to be used.
Prior to operating the Stamp Module, it must first be authorized and initialized. Figure 2 shows the
Authorization, Initialization, and Operating procedures.
3.2
Authorization procedure
3.2.1
Connect the Stamp Module
•
If possible, disconnect all physical devices that are currently attached to the host PC
(once section 3.2.2 is completed, you can reconnect those devices to the PC)
•
Connect the Stamp Module to the host PC via a FTDI device (LED D6 should light up
followed by D4)
Figure 2: The Authorization, Initialization & Operating Procedures
