10
866 294 5847 | baselinesystems.com | [email protected]
BASELINE CLOUD NETWORK MODULE
6
Align the holes at the bottom of the antenna
riser with the holes in the gasket at the
mounting location on the outside left wall of
the pedestal.
Feed the free end of the antenna cable
through the small hole that you made in the
gasket and into the inside of the pedestal.
2
Working from the outside of the pedestal,
insert the bolts that you removed earlier into
the four holes.
Working from the inside of the pedestal, thread
the nuts that you removed earlier onto the four
bolts. Tighten the nuts snugly.
7
Installing the Cloud Network Module into a Pedestal Cabinet, Cont.
8
Find the orange power connector on the wires
coming from the transformer. Gently pull the
connector away from the board to disconnect
the power.
