background image

User Manual

20

3.2.2 Record

This menu allows you to configure the channel recording settings.

Enable: 

Check to enable recording this channel.

Stream: 

Choose the recording quality. If you choose Dualstream, the system will record in 

both Mainstream & Substream. 

Pre-Record: 

If this option is enabled, the system starts recording a few seconds before an 

alarm event (motion detection for example) occurs. Use this option if your primary recording 
type is motion or I/O alarm based.

This menu allows you to specify when the system records and defines the recording mode for each 
channel.  The  recording  schedule  lets  you  set  up  a  schedule  like,  daily  and  hourly  by  normal 
(continuous) recording, motion recording and I/O alarm recording. To set the recording mode, click 
first  on  the  mode  radio  button  (Normal,  Motion,  IO),  then  drag  the  cursor  to  mark  the  slots.  The 
recording schedule is valid only for one channel. If you want to use the same recording schedule for 
other channels, use 

Copy f

unction. Click 

Apply 

to save your settings.

3.2.2.1 Record Settings

3.2.2.2 Record Schedule

Summary of Contents for RECORDER



































































Reviews: