1
2
P
PC
2
1
+
+
-
-
FULL
EMPTY
FLAT
HOLD
HOLD
“hold” appears when a button is
pressed but there is no other re-
sponse while this function is on.
AAA SIZE (R03/LR03, UM-4)
(not included)
Release
Hold mode
Replace the batteries when
the indicator flashes.
After the batteries are inserted:
If the year starts flashing on the display, set the time
so the unit can keep track of the time and date of recordings.
For details see “Setting the time” (page 3).
Inserting the batteries
Long life alkaline batteries are recommended.
If rechargeable batteries are to be used, rechargeable batteries manufactured
by Panasonic are recommended.
If the battery cover comes
loose:
Push the cover’s levers into the
cutouts in the compartment as
shown in the illustration.
This manual was printed
with soy based ink.
IC Recorder
Operating Instructions
Model No.
RR-QR400
RR-QR200
RR-QR100
Model RR-QR200 is only for the U.S.A.
Before connecting, operating or adjusting this product,
please read these instructions completely. Please keep this
manual for future reference.
Panasonic Consumer Electronics Company, Division of
p
Matsushita Electric Corporation of America
One Panasonic Way Secaucus, New Jersey 07094
http://www.panasonic.com
Panasonic Sales Company, Division of Matsushita Electric of
Puerto Rico, Inc. (“PSC”)
Ave. 65 de Infantería, Km. 9.5 San Gabriel Industrial Park, Carolina,
Puerto Rico 00985
Panasonic Canada Inc.
5770 Ambler Drive, Mississauga, Ontario L4W 2T3
www.panasonic.ca
c
2001 Matsushita Electric Industrial Co., Ltd.
Printed in Japan
RQT5967-P
F0301KB0
Note
.
Do not press the buttons while inserting the batteries. This may cause malfunction of
the unit or its display.
The battery indicator
The flash memory preserves files and file information even if you remove the batter-
ies or they go flat. Other memory items, however, revert to the factory settings if you
take more than thirty seconds to replace the batteries or leave flat batteries in the
unit for an extended period.
Note
.
≥
The battery indicator is not shown while the recorder is stopped.
≥
The unit does not work correctly if the battery cover is not closed completely.
Hold function
This function prevents accidental operation.
Note
.
≥
Lay the ribbons under the batteries to make removal easier.
≥
Be sure the ribbons do not stick out when the lid is closed.
3
Ribbons
Dear customer
Thank you for purchasing this product.
For optimum performance and safety, please read these instructions
carefully.
Release HOLD before at-
tempting any operation.
THE FOLLOWING APPLIES ONLY IN THE U.S.A.
CAUTION:
This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or televi-
sion reception, which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the interference
by one or more of the following measures:
≥
Reorient or relocate the receiving antenna.
≥
Increase the separation between the equipment and receiver.
≥
Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
≥
Consult the dealer or an experienced radio/TV technician for help.
Any unauthorized changes or modifications to this equipment would
void the user’s authority to operate this device.
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) This device may not
cause harmful interference, and (2) this device must accept any in-
terference received, including interference that may cause unde-
sired operation.
