Serial.link
Manual
10
/
12
v.1.3
© 2018 basalte
In case the Serial.link can’t be discovered automatically, you can enter the IP address manually
using the
Add manually
button.
By pressing the
Flash
button, the corresponding Serial.link will start flashing green for 5 seconds.
Finally select the Serial.link and press
Select
to continue configuring the Serial.link Ethernet
settings.
Change IP address
After selecting the Serial.link using the Discover feature, you can configure the network settings
using
Change IP configuration
.
Either select DHCP for assigning IP address dynamically or enter the static IP address with
corresponding subnet mask and default gateway.
