BarUp 271599, Manual

Page: 6 / 68

6
EN
Cleaning and maintenance
• UNPLUG POWER CORD FORM OUTLET.
• The appliance should be cleaned after use, and
before use if it hasn’t been used for a prolonged
period of time.
• Pour hot water into the interior of the container.
Rinse with a cold and damp sponge.
WARNING: BLADES ARE SHARP. CLEAN WITH
CARE!
• Never use aggressive cleaning agents or abra-
sives. Do not use any sharp or pointed objects.
Do not use petrol or solvents! Clean with a damp
cloth and detergent if necessary.
• Wipe outside of the ice crusher with a clean damp
cloth.
• NEVER IMMERSE THE APPLIANCE IN WATER.
Note: After cleaning, the first batch of crushed ice
should be thrown away.
Troubleshooting
If the appliance does not function properly, please check the below table for the solution. If you are still unable
to solve the problem, please contact the supplier/service provider.
Problem Solution
The ice crusher does not start
Make sure it is plugged in.
Make sure the safety circuit breaker is closed.
Make sure the switch on the appliance is turned to ON.
If the problem occurs after a long period of intensive use, the motor may have
overheated. Wait at least 30 minutes and try again. If you put the appliance in
a cool place, this will reduce the waiting time.
Technical specification
Operating voltage and frequency: 220-240V 50/60Hz
Rated power: 200W
Protection class: Class I
Speed: 1000rpm Waterproof protection class: IP23
Capacity: 3L
Dimensions: 194x329x(H)523mm
Net weight (approx.) : 5.4kg
Remarks: Technical specification is subjected to change without prior notification.
Circuit diagram
L
N
Microswitch
MOTOR
RED
GREEN
LIGHT
Circuit board
RED
BLACK
BLACK