- 36 -
Defrost
CAUTION!
Do not use boiling water for defrosting because it may damage plastic parts of
the device.
Never use sharp or metal objects to remove ice because they may damage the
cooling system.
For the best performance and lowest energy consumption, with excessive frost
formation on the wall of the evaporator or with 6 mm ice layer you should defrost the
device.
To start defrost, turn the temperature control to the
“OFF"
position and unplug the
device.
Remove all food products, drinks, etc., from the device and place them in another
freezer or refrigerator for the time of defrost to prevent perishing.
Remove the glasses, glass insert and shelf (if were in use) from the device.
Leave the door of the device open until the ice thaws. Collect the melted ice water
with sponge or towel.
Clean the device according to the instructions in section
6 “Cleaning“
. Thoroughly
dry the interior chamber.
Then, you may start using the device again. Follow the instructions set forth in
chapter
5.2 “Operation / Temperature control“.
