- 32 -
Connection
DANGER! Electric shock hazard!
The device can cause injuries due to improper installation!
Before installation and connecting the local power grid
specification should be compared with that of the device
(see rating plate). Connect the device only in case of
compliance!
Before you connect the device to the power supply prior to the first use, place the
device and allow at least 2 hours for the coolant circuit to stabilize and to avoid
malfunctions of the device.
After a power failure or removal of the plug, do not reconnect the device to the
power supply for at least 5 minutes.
The power supply circuit with the socket must be protected by the fuse of at least 16A.
Connect the device directly to a single grounded socket. Do not use any power bar or
multiple socket.
5.2 Operation
Preparation
Clean the device thoroughly before use, following the instructions in
section 6
“Cleaning”.
Dry the device thoroughly.
Plug the device into a single grounded socket.
Set the temperature using the temperature control. Follow the instructions in section
“Temperature control”
.
Insert the drinks and products into the device only when the device has reached the set
cooling capacity.
