Bartscher Salamander 100, Instruction Manual

Page: 22 / 62

- 22 -
5. Installation and operation
5.1 Safety instructions
WARNING! Electrical hazard!
The device must only be connected to a properly installed single socket with
protective contact.
Never yank cord to disconnect from outlet.
Cable must not touch any hot parts.
•
See that the cable does not touch any heat sources or sharp edges. Do not let the
cable dangle over the counter edge.
WARNING! Hot external surface!
During operation some parts of the device become very hot. In order to avoid
injuries do not touch any hot parts!
•
Do not use the device if it does not function properly, has been damaged or dropped.
•
Do not use any accessory or spare parts that have not been recommended by the
manufacturer. These can be dangerous for the user, or lead to damage of the device
or personal injury, and furthermore invalidate the warranty.
•
Do not lay the cable over carpets or heat insulations. Do not cover the cable. Keep
the cable away from operating range and do not dunk it into water.
•
Do not move or tilt the device when in operation.
WARNING! Hazard via electrical current!
The device may cause injuries due to improper installation!
Before installation, the local power grid specification should be compared with
that of the device (see type label).
Connect the device only in case of compliance!
Take note of the security advice!