- 26 -
WARNING!
Do not leave the device unattended during the descaling process!
Use goggles and protective gloves when descaling!
o
Wash hands thoroughly after descaling.
6.3 Safety instructions for maintenance
o
Check the mains lead from time to time to ensure it isn’t damaged in any way. Never use the
device if the lead is damaged. If the lead is damaged it must be replaced by a qualified
electrician.
o
In case of damage or malfunction, please contact your stockist or our customer service centre.
o
Only a qualified technician and using original spare parts and accessories should carry out
repairs and maintenance of the device. Do not attempt to repair the device yourself.
7. Troubleshooting
CAUTION!
The device is provided with an overheating protection.
When the overheating protection has been activated, let
the device cool down, remove the socket and push the
RESET button underneath the device several times.
The coffee maker is now ready for use again.
NOTE!
From experience, it can be said that the overheating protection is triggered when the
heating bore is calcified. An immediate decalcification is mandatory.
The overheating protection may also be activated during/by transport. Please follow the
instructions above!
In the following you may find causes for overheating protection activation and hints for
troubleshooting.
PROBLEM
CAUSE
REMEDY
Device is turned on but
the red control light
does not come on.
•
Did you forget to plug in
the mains plug?
•
Loose fuse
•
Defect fuse
•
Defect control lamp
•
Fuse mount defect
•
Plug in the mains plug
•
Contact retailer
•
Contact retailer
•
Contact retailer
•
Contact retailer
Machine is turned on but
does not function.
•
Machine is calcified.
•
Let the device cool down first.
Remove socket and press
RESET button underneath
the device. Decalcify the
device.
