- 43 -
5.1.2 Location
Place the device in the required place.
Place the device on an even, dry and
stable surface.
When selecting the place take into
consideration the dimensions of the
device (Section
4.1
“Technical
specification“
). Provide enough space to
securely operate the device.
The operator has to be constantly able to
see the ON/OFF switch and slice
thickness adjustment.
To securely use the slicer, keep at
least 20 cm distance (fig. 14) from the
slicer and walls, objects, cupboards,
etc.
The distance from the floor should be
approx. 80 cm.
The air humidity in the installation room
should be max. 75%, the air need to be
free of salt and the temperature should be
in the range from +5 °C to +35 °C; the
slicer should be always installed in the
rooms where the proper operation of the
device can be ensured.
Fig. 14
Make sure that the slice thickness
adjustment is set to
“0”
.
Check the compatibility of the blade
with the movable slice thickness wall
by swiping the finger in the direction
from the blade towards the movable
slice thickness wall (fig. 15),
never the
other way round.
Screw in the supplied feet, adjust them
and then attach the rubber element. (1,
2, fig. 15).
Fig. 15
Always
keep the workplace clean, dry and tidy
.