![background image](http://html.mh-extra.com/html/bartscher/multitherm-a200050/multitherm-a200050_instruction-manual_476676032.webp)
- 28 -
Connection
DANGER! Electric shock hazard!
The device can cause injuries due to improper installation!
Before installation and connecting the local power grid
specification should be compared with that of the device
(see rating plate). Connect the device only in case of
compliance!
Connect the device only to properly installed single
socket with protective terminal.
The electrical circuit in the socket must be secured to at least 16A. Only connect the
device directly to the wall socket; do not use any extension cords or power strips.
5.2 Operation
Before using the device, clean it in accordance with the instructions contained in
6
„Cleaning and descaling“
.
Turn the temperature control with the
red dot
all the way to the left.
Plug the power plug into the socket (the green control lamp lights up).
CAUTION!
It is important that there is always drinkable liquid in the container before
engaging the device. You must not pour undrinkable liquids such as acids,
bases or leys, oils, nitrates etc. in the mulled wine pot.
Pour the desired
drinkable
liquid in the mulled wine pot.
Minimum filling quantity of 2 litres.
DANGER! Electric shock hazard!
During operation it must be ensured that no liquids can
spill over as this can cause short-circuits in the electronic
control. Personal injury can be the result.
Summary of Contents for MultiTherm A200050
Page 1: ... MultiTherm A200050 Original Gebrauchsanleitung V7 0617 ...
Page 2: ......
Page 4: ......